A Research, Development & Testing facility of the Electrical Mfg. Utility Industry.
Recognised by DSIR & NABL (DST).GOVT. OF INDIA. BIS. IECEE- CB . DGFASLI . UL etc
P.O.BOX 760, GIDC
MAKARPURA, VADODARA-10




Abstracts of
CURRENT TECHNICAL LITERATURE in Electrical Engineering

  April-May 2003                                                                                                                            VOLUME 26
No.
4 & 5

3. ELECTRICAL MACHINES/MOTORS & DRIVES

32198 Dymond James H et.al

Instrumentation, testing and analysis of electric machine rotor steady state heating.

IEEE Trans. on Industry Applications, Vol.38; No.6; Nov./Dec. 2002; 1661-
1667

32199 Jovanovic Milutin G et.al

The use of doubly fed reluctance machines for large pumps and wind
turbines.

IEEE Trans. on Industry Applications, Vol.38; No.6; Nov./Dec. 2002; 1508-
1516
32200 Ostovic Vlado

Pole -Changing permanent -Magnet Machines.

IEEE Trans. on Industry Applications, Vol.38; No.6; Nov./Dec. 2002; 1493-
1499
32201 Stone G.C

Advancements during the past quarter century in on-line monitoring of
motor and generator winding insulation.

IEEE Trans. on Dielectrics and Electrical Insulation, Vol.9; No.5; October,
2002; 746-751
32202 Ciumbulea G

Electromagnetic forces for linear synchronous structures.

Electroteh. Electron. Autom.,* Vol.48; No.3-4; 12-14 March-April, 2000; In
Romanian
32203 Wang Fengxiang et.al

Parameter and performance comparison of doubly fed brushless machine
with cage and reluctance rotors.

IEEE Trans. on Industry Applications, Vol.38; No.5;-Sept./Oct. 2002; 1237-
1243
32204 Fukami Tadashi et.al

Compensation for neutral current harmonics in a three-phase four-wire
system by a synchronous machine.

IEEE Trans. on Industry Applications, Vol.38; No.5; Sept./Oct.2002; 1232-
1236
32205 Differential protection for generators and transformers.

Electrical Review, Vol.X; No.2; Feb. 2003; 24-27
32206 Mraz Stephen

Copper sheets replace motor windings.

Machine Design, Vol.74; No.21; Nov.7; 2002; 58
32207 Cavagnino Andrea et.al

A comparison between the axial flux and the radial flux structures for PM
synchronous motors.

IEEE Trans. on Industry Applications, Vol.38; No.6; Nov./Dec. 2002; 1517-
1524
32208 Gleichman RC

Failure modes and field testing of medium -voltage motor windings.

IEEE Trans. Ind. Appl., Vol.38; No.5; Sept. -Oct. 2002; 1473-6
32209 Su Tinghsu et.al

Suppression control method for torque vibration of A.C motor utilizing
repetitive controller with fourier transform.

IEEE Trans. on Industry Applications, Vol.38; No.5; Sept. I Oct. 2002;
1316-1325
32210 Dymond J H et.al

Acceleration tests -to determine salient pole synchronous motor inrush
currents and torques.

IEEE Industry Applications Magazines, Vol.8; No.4; July I Aug. 2002; 44-50
32211 Mukherjee K et.al

Simplified steady -state model of an SCR -inverter -based load -
commutated commutatorless series motc.

IEEE Trans. on Energy Conversion, Vol.17; No.2; June, 2002; 197-202
32212 O'Hearn Timothy L et.al

Integrating process and motor control.

IEEE Industry Applications Magazine, Vol.8; No.4; July I Aug. 2002; 61-65
32213 Stranges MKW et.al

Effect of surge testing on unimpregnated ground insulation of V PI stator
coils.

IEEE Trans. on Ind. Appl., Vol.38; No.5; Sept. -Oct. 2002; 1460-5

32214 Shi K.L et.al

A rule -based acceleration control scheme for an induction motor.

IEEE Trans. on Energy Conversion; Vol.17; No.2; June, 2002; 254-259
32215 Kohler J.L et.al

Condition monitoring of stator windings in induction motors. I.
Experimental investigation of the effective negative-sequence impedance
detector.

IEEE Trans. Ind. Appl., Vol.38;No.5; Sept.-Oct. 2002; 1447-53
32216 Stephenson JM et.al

Online torque-ripple minimization in a switched reluctance motor over a
wide speed range.

IEE Proc. Electr. Power Appl.,* Vol.149; NO.4; July, 2002; 261-7
32217 iedenbrug Ernesto J et.al

Modern online testing of induction motors for predictive maintenance and
monitoring.

IEEE Trans. on Industry Applications, Vol.38; No.5; Sept./Oct. 2002; 1466-
1472

32218 Gomez JC & Morcos MM

Voltage sag effects on sensitive equipment due to starting cycles of
induction motor .

IEEE Power Engineering Review, Vol.22; No.8; August, 2002; 51-52
32219 Nasir Uddin M et.al

Performances of Fuzzy-Iogic-based indirect vector control for induction
motor drive.

IEEE Trans. on Industry Applications, Vol.38; No.5; Sept. I Oct. 2002;
1219-1225
32220 Mecrow BC et.al

Switched reluctance motors with segmental rotors.

IEE Proc. Electr. power Appl.,* Vol.149; No.4; July, 2002; 245-54
32221 World Pumps UK

Gear pumps -Types & Selection.

pumps India, Vol.9; No.2; December, 2002; 8, 10, 12, 15
32222 Updhyay Anil

Submersible kit manufacturers -'KIT' will Hit the economy.

Pumps India, Vol.9; No.2; December, 2002; 19, 20
32223 Desai ML Mutallik

Energy conservation in centrifugal pump.

Pumps India, Vol.9; No.2; December, 2002; 70-72.

32224 Irvine Gooff and Gibson Ian H

VF drives as final control elements in the petroleum industry.

IEEE Industry Applications Magazine, Vol. 8; No.4; July I Aug. 2002; 51-60
32225 Hodowanec Mark & Finley William R .

Copper versus aluminium induction motor rotors -which construction I!
best?

IEEE Industry Applications Magazine; Vol.8; No.4; July I Aug. 2002; 14-25